Premium Coffee Maker With Integrated Grinder Please read the manual fully before using the appliance and keep the manual safe for future reference.
Contents Page Safety instructions Page 3 Appliance specific safety instructions Page 4 Appliance components illustration Page 5 Control panel Page 5 Before using the appliance Page 6 Operating the appliance Page 6 Making coffee with coffee powder Page 7 Setting the Automatic start function Page 8 Cleaning and maintenance Page 8 Disposal of the appliance Page 9 UK and EU Guarantee Page 10 Electrical information Page 11
Safety instructions When using any electrical appliance, basic safety precautions should always be followed including: This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
Appliance specific safety instructions Before cleaning, attaching components or carrying out repairs on the appliance always remove the cord from the electrical supply. The use of accessory attachments that are not approved by the manufacturer is not recommended and may cause the appliance to malfunction and injury to the user. Only ever use the grinder for grinding roasted coffee beans. Never use it for any other ingredients.
Appliance components illustration 1. Grinder cover 8.Coffee filter 10.Funnel 11.Anti-drip valve 9.Knob 2. Grinder Box 3. Water tank cover 4.Water tank 5. Funnel press key 12.Funnel support 13.Tempered Glass jug Control Panel 6. Water gauge 7.
Before using the appliance Ensure that all parts and accessories are in working condition. Run only clean water through the appliance to remove any dirt. This can be done by filling the water reservoir with water, plugging the appliance into to the mains and following the steps found in the section of the manual “operating the appliance”. Repeat the process at least twice to ensure the appliance is fully cleaned.
coffee produced, the one bean symbol represents the weakest setting with the three bean symbol the strongest. Press the “On/Off” button once and wait for three seconds, the coffee will now start grinding. Once the grinding process has finished wait for three seconds and the coffee should begin to brew, this is indicated in the LCD display (14) by the letters “Brew”. Once the brewing process has finished the Brew letters will disappear from the LCD display (14).
the LCD display. The coffee will be automatically kept warm for two hours by the appliance. Setting the Automatic start function 1. Follow steps 1-6 in the section “operating the appliance” 2. Set the current time and wait till the numbers stop flashing. 3. Press the programme button (18) and set the time you wish the coffee making process to begin. 4. Once the timer has been set (the numbers stop flashing in the LCD display (14)) press the “programme” button (18) again.
Disposal of the appliance Please note that this Andrew James product is mark with this Symbol: This means that this product must not be disposed of together with ordinary household waste, as electrical and electronic waste must be disposed of separately. In accordance with the WEEE directive, every member state must ensure correct collection, recovery, handling and recycling of electrical and electronic waste. Private households in the E.U.
UK and EU Guarantee Your new Andrew James product comes with a 24 month guarantee and a 2 year fixed warranty, effective from receipt confirmation. Your receipt or order number is required as proof of purchase date so it is imperative that you keep it safe. This guarantee only applies if the item has been used solely for the use intended, and all instructions have been followed accordingly. Please note this product is only for domestic use only and is not for commercial use.
Electrical Information Please note: It is extremely important that the wires or cores in the flex are connected to the correct terminals in the plug. If the colour of the mains lead of the appliance does not correspond with the coloured markings identifying the terminals in your plug proceed as follows: The Live (Brown) wire connects to the right- most live (L) terminal nearest to the fuse. The Neutral (Blue) wire connects to the left-most neutral (N) terminal.
qualified person in order to avoid a hazard. All of our electrical appliances conform to pre-existing EC Directives 2006/95/EC (Low Voltage Directive) and 2004/108/EC (EMC Directives). For further information please visit http://www.esc.org.
