rother with Shaker and Wall Mount Instruction Manual
3
Appliance components diagram
Aaching the wall holder
1. Mark two holes in the wall where you want to mount the wall holder.
2. Drill two small holes into the marked area with a 5mm drill.
3. Place a wall plug into each of the holes.
4. Fix the wall holder into the wall using screws.
Filling the chocolate shaker
1. To ll the chocolate shaker ,rst press the buon on the side of the shaker and
remove the lid.
2. Fill the chocolate shaker with cocoa powder.
3. Return the lid to its previous posion by lining the buon with the hole and
pressing down on the lid to secure it into place.
Chocolate shaker lid
Release buon
Release hole
Chocolate shaker
Wall mount
Screw & wall plugs
Motor housing
Sha
Frothing whisk
Release buon
On/O buon