User's Manual

WLS Installation and Maintenance Manual Installation
Geometrix
®
Wireless Location System 14
Andrew Corporation Proprietary
Figure 2-3 Wall Mount Bracket Configuration
2.3 Ground Cabling
1. Cut the ground cable to the appropriate length and crimp the supplied ground lugs to
each end.
2. Attach one end to the WLS rear panel grounding post.
3. Attach the other end to a ground location within the WLS rack.
4. Ensure connections are clean and tight.
2.4 Power Cabling
CAUTION: Ensure the base station WLS and RFDU power breakers are in the OFF
position prior to connecting power cables.