User's Manual

Geometrix
®
Wireless Location System v
Andrew Corporation Proprietary
About This Document
This manual provides installation and maintenance information for the Geometrix

Wireless
Location Sensor (WLS). This is intended for use by base station service personnel responsible
for WLS installation and maintenance. Chapter 1 describes the WLS equipment and the interface
to the host base station. Chapter 2 provides procedures for a new WLS installation. Chapter 3
details procedures for replacement of previously installed WLS equipment. Chapter 4 describes
WLS preventive maintenance.
Reference documentation includes:
• Geometrix System Overview,
Part No. MN-GEO-OV-01
• Geolocation Control System Installation and Maintenance Manual,
Part No. MN-GEO-IM-02
• Network Management User Guide,
Part No. MN-GEO-UG-01
• Alarm Manager Definition Document,
Part No. MN-GEO-TP-01
Safety Warnings
CAUTION – There exists a risk of personal injury and equipment damage when handling
this equipment. Read and follow instructions in this manual.
CAUTION – Hazardous voltage may be present. To reduce the risk of electric shock
and danger to personal health, follow instructions in this manual.
CAUTION - Protect from electrostatic discharge damage when handling the unit prior to
ground connection. Wear a grounded electrostatic protection wrist strap when handling.
Technical Support Options
Email:
[e-mail]
Website:
www.geometrix911.com
Technical Support:
[phone]
Sales & Marketing:
(877) GEO-E911 or [phone]
FAX:
[phone]
Mailing Address:
Andrew Corporation
2002 Edmund Halley Drive, 3
rd
Floor
Reston, VA 20191 USA