User's Manual

User’s Manual for Node C Network Elements

Page 16

M0121A1A_uc.doc

3.1.3 Connection Option

• In order to mount the system using the cabinet combining kit, dismount the

mounting brackets from the cabinets of the units by loosening the hexagon head

screws M10x20 by which the brackets are screwed to the housing (four per unit).

Do not unscrew those screws, only loosen them by approx. three turns and take

off the brackets.

• The two inner brackets are no longer required; exchange the outer brackets and

fasten them to the cabinets (as indicated below).

Remove and discard

1s t s t ep:

2nd st ep:

Br acket 1

Br acket 2

Exchange Bracket 1

and Bracket 2; t hen

mount as shown:

3rd st ep:

Join unit s and mount

joint system to wall

G0987MG

figure 3-3 Connection option

G0987M

Was her DIN125

Hexagon head

screws M10x 4

M10 nut s

Br ack et sConnect ing plat e

• Join the two cabinets using

the parts of the cabinet

combining kit as indicated.

• Use the special mounting

plan supplied as part of the

cabinet combining kit for

drilling the according holes

and mount the system to the

wall.

figure 3-4 Cabinet combining kit