User's Manual

User’s Manual for Node C Network Elements
Page 52
M0121A1A_uc.doc
4. The next window is Host or Guest.
Choose Guest. Click Next.
5. The next window is Select a Device.
This window will provide a drop-down list of known communication ports (devices)
to choose from. Choose a serial port. If the RS232 is used, this port is most likely
(COM1). If a USB port is used some other COM port number should be used.
Take care that the USB driver is installed and connected before completing this
selection or the connection will not work.
Click Next.
6. The next window is Connection Availability.
Choose Only for myself. Click Next.