User's Manual

User’s Manual for Node C Network Elements

Page 64

M0121A1A_uc.doc

4.2.4.3 Technician Setup

figure 4-7 Technician Setup menu

Description Explanation

Filter Selection

Select the frequency range for channel 1, 2 and

3; for filter setting refer to chapter 5.2.1 Filters.

Filter Power to Total Power Ratio

Enter ratio of pilot power to total power

(depending on base station).

Downlink Power

Downlink Gain

Select Power mode or Gain mode and set the

desired power or gain, respectively.

Relative Uplink Gain

Absolute Uplink Gain

Select Relative or Absolute Uplink Gain mode

and set the respective value.

Downlink DCM path

Uplink DCM path *

Downlink PA

Uplink PA

Complete Network Element

Interference Cancellation

Enable or disable the respective feature.

* In the Uplink DCM path it is possible to enable or disable the primary and diversity paths

individually.