User's Manual

User’s Manual for Node C Network Elements
Page 86
M0121A1A_uc.doc
When the battery is charging, an LED on the module turns on. When the battery is
fully charged, the LED will switch off.
The location of the battery backup parts are illustrated in figure 6-2 Location of
battery backup.
For technical data of the battery backup module refer to chapter 7.2.3 Specifications
for Optional Equipment.
5.4.2 PSU Redundancy
The Node C Interface Unit may be equipped with two power supplies. This
guarantees full power redundancy. The PSUs are interconnected by a current control
line for current load sharing with a ratio of approx. 50% to each supply.
Currently the PSU redundancy option is only available for Node C x37.
5.4.3 High Rejection Filter
This software option provides a highly sophisticated filter feature that can be
controlled via the “Technician Setup” menu of the web page (see figure 4-7
Technician Setup menu).