Installation Guide
Table Of Contents
- Table of Contents
- Document Overview
- Era System Overview
- CAP H Overview
- Safely Working with a CAP H
- Installing a CAP H
- Using the Status LED to Determine State of the CAP H
- Maintenance
- Contacting CommScope
M0201AKD_uc CommScope Era
™
High Power Carrier Access Point Installation Guide
© December 2019 CommScope, Inc. Page 1
DOCUMENT OVERVIEW
This installation guide provides a product overview and installation instructions for the High Power Carrier
Access Point (CAP H), which allows transmission between Comm
Scope Era™ equipment, antennas, and
Ethernet devices (such as WiFi and IP cameras). Table 1 lists the CAP H models that this installation guide
supports.
Table 1. Supported CAP H Models
Part Number
1
Model Name Designed for use in…
7772983-xxxx CAP H 8/9/18/21 EMEA
7821740-xxxx CAP H 9/18/21/26 EMEA
7825719-xxxx CAP H 7E/80-85/17E/19 North America
7825730-xxxx CAP H 17E/17E/19/19 North America
7835476-xxxx CAP H 23/23/25T/25T North America
1 The “-xxxx” suffix identifies specific features or options for CAP H variants including whether
th
e CAP H has an AC or DC power supply. Contact your local sales representative for further
information. See also "CommScope Part Numbers" on page 3.
For information on how to find the minimum software requirements for Era hardware, refer to
"Hardware to Software Mappin
g Information" on page 54.
Document Revision History
This is the fourth release of the CommScopeEra
™
HighPowerCarrierAccessPointInstallationGuide, which
• adds support
for additional CAP H APs.