Installation Guide

M0201AKG_uc CommScope ERA
®
High Power Carrier Access Point Installation Guide
© February 2021 CommScope, Inc. Page 1
DOCUMENT OVERVIEW
This installation guide provides a product overview and installation instructions for the High Power Carrier
Access Point (CAP H), which allows transmission between CommScope ERA
®
equipment, antennas, and
Ethernet devices (such as WiFi and IP cameras). Table 1 lists the CAP H models that this installation guide
supports.
Document Revision History
This is the seventh release of the CommScope ERA
®
High Power Carrier Access Point Installation Guide, which
• replaces Figure 11 on page 47
• adds new variants
The Auxiliary Port and Ethernet devices are not currently supported by the ERA software, but will be
supported in a future release.
Table 1. Supported CAP H Models
Part Number
1
Model Name Designed for use in…
7772 9 83 -x x xx CAP H 8/ 9/ 18/ 21 EM EA
7821 7 40 -x x xx CAP H 9/ 18 /21 /26 EM EA
7834 1 13 -x x xx CAP H 7- 8/ 9/ 18 /21 EM EA
7825 7 19 -x x xx CAP H 7E / 80-8 5 /17 E /19 Nort h A me ri ca
7825 7 30 -x x xx CAP H 17 E/1 7 E/1 9/1 9 Nort h A me ri ca
7835 4 76 -x x xx CAP H 23 /23/ 25T/25T Nort h A me ri ca
7836 1 23 -x x xx CAP H 26 /26T EM EA
7841 0 31 -x x xx CAP H 7- 8/ 18 /21 / 26 EM EA
7841 1 53 -x x xx CAP H 80 -85/ 17E/19/2 6 CAL A + C AN
7843 4 00 -x x xx CAP H 85 /9/1 8/2 1 AUS
7843 4 10 -x x xx CAP H 7/ 23 T /2 6 AUS
7844 7 39 -x x xx CAP H 23 T /2 6 EM EA
7848 2 24 -x x xx CAP H 85 L /9/1 8/2 1 AUS/ NZ
1 "The "-000x" suffix provides additional information about specific CAP H variants. Contact
your local sales representative for further information.
For information on how to find the minimum software requirements for ERA hardware, refer to
"Hardware to Software Mapping Information" on page 59.