User's Manual Part 2

M0201AA ION
®
-E Series Hardware Installation Guide
© June 2017 CommScope, Inc. Page 97
Installing CAP Ls
Flat-Surface Mount a CAP L
YoucanplaceaCAPL,withoutitsfasteninghardware,onaflatsurface,suchasashelf,desk,cabinet,orany
otherhorizontalsurfacethatallowsstableplacement.
ThesurfacemustbeabletobeartheweightoftheCAPL;seeTable7-5onpage90.
IfyoumounttheCAPLonaflatsurface,followtheruleslistedbelow.
Wall Mount a CAP L Using a Flat Mounting Bracket Kit (PN 7774353-00)
1 Followthestepsin"UnpackandInspecttheCAPLandOptionalAccessories”onpage96.Table7-6lists
theFlatMountingBracketKitcomponents.
2 Refertoandobserveallcautionslistedin"MountingCautions”onpage95.
3 Referto"DeterminetheCAPLMountingSite”onpage90todeterminethemountinglocation,whichmust
beabletosupporttheweightanddimensionsoftheCAPL.
4 Referto"MountingOrientation”onpage93todeterminethemountingorientationoftheCAPL.
Always mount the CAP L with the face containing the mounting holes against the mounting surface.
To maintain proper ventilation, keep at least 76 mm (3-inch) clearance around the CAP L.
Do not stack CAP Ls on top of each other.
Table 7-6. Flat Mounting Bracket Kit (PN 7774353-00)
Quantity Part Number Component
2 7725696 Mounting Brackets
6 100901-50 M6-1.0 x 14mm screws
CAP L with Flat Mounng Bracket
(mount vercally)
CAP L with Fan Kit and Flat Mounng Bracket
(mount horizontally)