User's Manual Part 2

ION
®
-E Series Hardware Installation Guide M0201AA
Page 62 © June 2017 CommScope, Inc.
Installing UAPs
Install the UAP
12 InsertthefourUAPGuideLockPinsintothethreadedholesinthetopoftheUAPasshownbelow,and
thenusean8mmmetrictorquewrenchtotightenthemtoatorqueof2.7N-m.
13 WhileholdingtheUAPbelowtheshroud,connecttheCat6AcablestotheMAINandAUXRJ-45portsof
theUAP.
14 Ifrequired,attachthegroundwiretotheUAP'sgreengroundingscrew.
4 Guide Lock Pins