User's Manual Part 2

ION
®
-E Series Hardware Installation Guide M0201AA
Page 98 © June 2017 CommScope, Inc.
Installing CAP Ls
5 AttachthetwomountingbracketstothebackoftheCAPLenclosure.
a UsethreeoftheM6-1.0x14mmscrews(PN100901-50)thatcamewiththeFlatMountingBracket
KittoattachtheleftortopmountingbrackettothethreecorrespondinghorizontalorverticalM6-1.0
mountingtapsonthebackoftheCAP
Lchassis.
b UsethreeoftheM6-1.0x14mmscrewsthatcamewiththeFlatMountingBracketKittoattachthe
rightorbottommountingbrackettothethreecorrespondinghorizontalorverticalM6-1.0mounting
tapsonthebackoftheCAP
Lchassis.
6 Usefour5/16-inchorM8lagscrews(orwhateverscrewtypeisappropriateforthematerialtowhichthe
CAP
Listomountedon)tomounttheCAPLtothewall.
7 Followthestepsin"(Optional)GroundtheCAPL”onpage110ifgroundingisrequiredinyourlocalityor
ifyouprefertogroundtheCAPL.
Figure 7-6. CAP L (No Fan Kit) with Flat Mounting Bracket Kit
One Mounng bracket
(PN 7725696)
in vercal posion
Three M6-1.0 x 14mm
screws (PN 100901-50)
One Mounng bracket
(PN 7725696)
in vercal posion
Three M6-1.0 x 14mm
screws (PN 100901-50)
NOTE: Install a CAP L that does not have a Fan Kit vercally.
Fan Kit