User's Manual Part 3

M0201AA ION

-E Series Hardware Installation Guide

Installing CAP Ls

NOTE: The Power connector and the Optical Port 2 connector are plugged as they are not used in this

configuration.

3 UseCAT6AcabletoconnecttheOpticalPort1connectortothePoE.

UNRESOLVED: Not really sure what “to the PoE” means.

UNRESOLVED: To what does the other end of the CAT6A cable connect?

4 ConnecttheAuxiliaryconnectorasappropriateforthisinstallation.

UNRESOLVED: Is the AUX connector capped during shipment? If yes, state to remove dust cap? If tool

required, need to know what that tool is.

UNRESOLVED: The AUX port provides a connection to external Ethernet devices such as WiFi and IP

cameras. Spec stated that cabling is via the appropriate CAT cable for installed unit

protocol—what cable type(s) are supported for each unit type to which it can connect?

UNRESOLVED: Verify that maximum attached cable length is 3 meters (9.8 feet).

UNRESOLVED: To what does the other end of the cable connect to on external Ethernet devices such as WiFi

and IP cameras?