User's Manual

Manual for ION™-M7P/17P (M-cab)
& Subassemblies
Page 25 MF0145A7A_uc_FCC_modif.doc
4.2.3. Grounding
Grounding must be carried out. Connect an earth-bonding cable to the grounding
connection provided at the outside of the Remote Unit (see section 4.2.2
Connections). Do not use the grounding connection to connect external devices.
figure 4-6 Grounding bolt with
loosened hex nut
figure 4-7 Grounding bolt, schematic view
After loosening the hex nut, connect the earth-bonding cable between the two
washers as illustrated in the figures above. Then, fasten all parts again with the hex
nut.
4.2.4. Power Connection
Before connecting electrical power to the RU, the system must be grounded as
described in the previous section.
Mains power must be connected at the mains connector of the unit (see section 4.2.2
Connections).
The power supply plug is part of the delivery. The correct wiring of the power supply
plug is as follows: