User's Manual

Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Amplifier Operations / Maintenance Manual
DWG NO:
Error! Not a valid link.
Rev:
Error!
Not a
valid
link.
Date
:06/16/2004
Page:
10 of 63
AC Power 120 VAC Single Phase
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measured two-output carriers at +20.0 dBm/C (+19.0
dBm/C for RF Fed BDA) at 483.1625 MHz and 483.2375 MHz with a BDA gain setting
of 48 dB.
3.2.2 400 MHz Bi-Directional Amplifier Uplink Specification
PARAMETER UPLINK SPECIFICATION
Operating Frequency Range
486.1625 – 486.2375 MHz
Pass Bandwidth 75 kHz
Gain Typical 48 dB
Output Gain Adjustment
1
30 dB
Composite Output Power +5 dBm max.
Composite Input Power
(With ALC Activated)
-14 dBm max.
Impedance 50 Ohms
VSWR 2:1
OIP3
2
+ 26 dBm (+44 dBm; RF Fed BDA)
Noise Power max. @ 48 dB Gain -110 dBm/Hz
AC Power 120 VAC Single Phase
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measured two-input carriers at – 48 dBm/C (-30 dBm/C
for RF Fed BDA) at 486.1625 MHz and 486.2375 MHz with a BDA gain setting of 48
dB.
3.2.3 800 MHz Bi-Directional Amplifier Downlink Specification
PARAMETER DOWNLINK SPECIFICATION
Operating Frequency Range
866 – 869 MHz
Pass Bandwidth 3 MHz
Gain Typical 48 dB
Output Gain Adjustment
1
30 dB
Power Output @ 16 Carriers +11.1 dBm/C
Power Output @ 8 Carriers +16.8 dBm/C
Composite Output Power +30 dBm max.