User's Manual

Wireless Innovations Group
2601 Telecom Parkway
Richardson, Texas 75082
400/800 MHz Fiber Optic & RF Fed Bi-Directional
Amplifier Operations / Maintenance Manual
DWG NO: AE04B-A1669
Rev: B
Date: 06/18/2008
Page: 11 of 63
OIP3
2
+44 dBm
Noise Power max. @ 48dB Gain -64 dBm/Hz (-110 dBm/Hz; RF Fed BDA)
AC Power 120 VAC Single Phase
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measured two-output carriers at +23.5 dBm/C (+16.8
dBm/C for RF Fed BDA) in the 851 – 856 MHz band, with a BDA gain setting of 48 dB.
3.2.4 800 MHz Bi-directional Amplifier Uplink Specification
PARAMETER UPLINK SPECIFICATION
Operating Frequency Range
806 – 811 MHz
Pass Bandwidth 3 MHz
Gain Typical 48 dB
Output Gain Adjustment
1
30 dB
Composite Output Power +5 dBm max.
Composite Input Power
(With ALC Activated)
-14 dBm max.
Impedance 50 Ohms
VSWR 2:1
OIP3
2
+ 26 dBm (+44 dBm; RF Fed BDA)
Noise Power max. @ 48 dB Gain -110 dBm/Hz
AC Power 120 VAC Single Phase
Notes:
1.Via Front Panel RS232 Connector.
2. Two-Tone Intermodulation: Measure at two-input carriers of -48 dBm/C (-30 dBm/C
for RF Fed BDA) in the 806 – 811 MHz band, with a BDA gain setting of 48 dB.
3.3 Mechanical Specifications
PARAMETERS SPECIFICATION
RF Connectors Type-N Female
RS232 Connector D-Sub, 9 pin
Mounting Configuration 19.0 inch Rack Mount
Dimensions Typical (HxWxD) 6.4 in. x 19.0 in. x 15.8 in.
Cooling Convection, External Heatsink
Chassis Stud Ground
3.4 Environmental Specifications