User Manual

Users Guide - Andrew InCell™ Fiber Optic Distributed Antenna System
- ii -
Proprietary Information
This document is the property of Andrew Corporation. The information contained herein is
proprietary to Andrew, and no part of this document may be reproduced or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the express written
permission of Andrew.
Disclaimer
Andrew reserves the right to make changes, without notice, to the specifications and materials
contained herein. While we have worked diligently to insure every element presented is correct,
we shall not be responsible for errors. For the latest product information and technical
specifications, please see the contact information below.
 Copyright Andrew Corporation, July 2001, Printed in USA, All rights reserved.
FCC Notice
This equipment complies with Part 22 of the FCC rules. Any changes or modifications not
expressly approved by the manufacturer could void the user’s authority to operate the equipment.
Warning
In order to comply with FCC rules for RF exposure, the following must be observed:
1. The antenna for this device must have a gain of no more than 5.5 dBi.
2. The antenna must be installed such that a minimum separation distance of 20 cm. is
maintained between the antenna and any persons.
Trademarks
InCell™ is a trademark of Andrew Corporation. All other trademarks belong to their respective
owner.
Contact Information
For more information about Andrew’s capabilities to extend RF signals coverage into structures,
including office buildings, shopping complexes, warehouses, tunnels, and mines, please contact
us using the information below:
Andrew Corporation
Distributed Communications Systems
2601 Telecom Parkway
Richardson, Texas 75082
Attention: Mr. Matt Melester
E-mail:[e-mail]
Fax: [phone]
Voice: [phone]