User Manual

Users Guide - Andrew InCell™ Fiber Optic Distributed Antenna System
7-3
InCell Signal Distribution Unit (SDU)
Andrew part number AE04A-D0634-003 is a 19” rack mount, 8-way power divider for use in
large in-building coverage systems, combining or dividing signals for 8 CDUs. The wide 800 to
2000 MHz range allows it to be used in InCell systems providing coverage for SMR, cellular,
GSM 900, DCS 1800 and PCS frequency bands. The SDU is 1U in height (1.75”) and has 9
Type N connectors on the front panel.
Fiber Optic Cable Puller
Andrew has a fiber optic cable pulling kit, part number AE04J-A0745, that is designed to pull
fragile fiber optic cable assemblies through a building without damaging the fiber or connectors.
When the cable pulling kit instructions are followed, the cable assemblies may be pulled through
a building with the stress on the rugged outer jacket of the cable.
Cell-Max™ Indoor Omni Antennas
Andrew offers many types of indoor omni directional antennas in the Cell-Max™ product line.
These antennas are available in single band and multi-band models with different connector
options. Andrew recommends using the multi-band antennas with 2 meter coax jumpers and
SMA male connectors. These antennas plug into the ERAU and eliminate the need for buying
coax jumper cables. The following table shows several part numbers of various antenna options:
Part Number Description Frequency Range
AHM1018-3602-02SM Broadband omni antenna, 2-meter
pigtail cable with SMA male
connector. European & US bands.
806-906/1710-2170 MHz
AHM0819-3602-02SM Broadband omni antenna, 2-meter
pigtail cable with SMA male
connector. US bands.
806-906/1850-1990 MHz
AHM0918-3602-02SM Broadband omni antenna, 2-meter
pigtail cable with SMA male
connector. European bands.
870-960/1710-2170 MHz
Cell-Max™ Indoor Directional Antennas
Andrew offers many types of indoor directional antennas in the Cell-Max™ product line. These
antennas are available in single band and multi-band models with different connector options.
Andrew recommends using the multi-band antennas with 2 meter coax jumpers and SMA male
connectors. These antennas plug into the ERAU and eliminate the need for buying coax jumper
cables. The following table shows several part numbers of various antenna options:
Part Number Description Frequency Range
AHM0819-1006-02SM Broadband directional antenna, 6 dBi,
2-meter
p
i
g
tail cable with SMA male
806-896/1850-1990 MHz