Specifications

Stowed Reflector & Feed Support Struts
3.0 T
owing
CAUTION: Ensure front trailer jack is contacting ground
before raising outrigger jack assemblies.
3.1 When hooking trailer to the tow vehicle, position trailer
tongue over ball hitch and carefully lower jack to engage
hitch assembly. Ensure that the trailer jack is fully retracted
and tilted into its tow position, prior to towing.
3.2 The safety chains should be crossed under the tongue
and connected to the tow vehicle. The breakaway cable
from the hydraulic brake mechanism in the trailer hitch
should be connected solidly to the frame or bumper of the
tow vehicle with just enough slack to allow cornering.
3.3 Hook up the electrical pin connector and check that all
brake, signal and turning lights are properly functioning.
11