Technical data

Upon receipt of your order, the shipment should be verified to ensure that all parts have
reached your site. This process should occur before the installation process begins.
Andrew Corporation thoroughly inspects and carefully packs all equipment before shipment.
If you find that there are missing components, please refer to step-by-step instructions on how
to properly report the equipment loss.
When you have received your order, verify that all parts contained in the shipment correspond
to the parts listed on your packing list.
If you find that the equipment was damaged during the shipping process, you should file a
claim with the carrier. Follow the “Reporting Visible Loss or Damage” or “Reporting Concealed
Damage” procedures when filing a claim with a carrier.
Make a note of any loss or evidence of external damage on the freight bill or receipt, and
have it signed by the carrier’s agent. Failure to adequately describe such external evidence of
loss or damage may result in the carrier refusing to honor a damage claim. The form required
to file such a claim will be supplied by the carrier.
Concealed damage means damage which does not become apparent until the unit has been
unpacked. The contents may be damaged in transit due to rough handling, even though the
carton may not show external damage. If you discover damage after unpacking the unit,
make a written request for an inspection by the carrier’s agent, then file a claim with the carrier
since such damage is most likely the carrier’s responsibility.
After opening your shipment, you should take inventory of the parts immediately. Check each
item received in you shipment against the packing slip included with the shipment. If any
items are missing, please notify Andrew Corporation immediately by contacting the Customer
Service Center at one of the phone numbers listed.
Andrew Corporation tries to ensure that all items arrive safe and in working order.
Occasionally, despite these efforts, equipment is received that is not in proper working
condition. When this occurs, and it is necessary to return the equipment to Andrew
Corporation for either repair or replacement, return can be expedited by using the following
procedure:
Call the Andrew Customer Service Center and request a Return Material Authorization (RM)
number, as well as the address to which you should forward the material(s).
Tag or identify the defective equipment, noting the defect or circumstances. Also, be sure to
write the RM number on the outside of the carton. It would be helpful to reference the Andrew
sales order and purchase order number, as well as the date the equipment was received.
Pack the equipment in the original container with protective packing material. If the original
container and packing material are no longer available, pack the equipment in a sturdy
corrugated box and cushion it with appropriate packing material.
Be sure to include the following information when returning the equipment:
• Your Company Name
• Your Company Address City, State and Zip Code
• Telephone Number
• RM Number
• Problem Description
• Contact Name
Note: Absence of the RM number will cause a delay in processing your equipment for repair.
Be sure to include the RM number on all correspondence.
Ship the equipment to Andrew Corporation using UPS, U.S. Postal Service, or other
appropriate carrier, freight prepaid and insured. The material should be forwarded to the
address given by the Andrew contact in Step 1.
Getting Started
Parts Verification
Reporting Equipment
Loss or Damage
Reporting Visible
Loss or Damage
Reporting Concealed
Damage
Inventory Equipment
Received
Returning Equipment
Step 1
Step 2
Step 3
Step 4
Step 5
9