Technical data

Mount the second azimuth support plate (P/N 205875) pivot assembly to the rear end of
the ground mount assembly as shown in Figure 16. Spacer blocks (P/N 205874) and
5/8 inch hardware (hex bolt, flatwasher, hex nut) should be inserted as shown in Figure 26.
Mount the azimuth strut to each bracket on the ground mount assembly as shown in
Figure 27a and Figure 27b.
Installation Procedures
Step 8
Step 9
29
3/4 inch
Flat Washer
Figure 26
5/8” Hardware
Spacer Blocks
Figure 27-A Figure 27-B