Technical data

Installed last two universal brackets (7542460) on spacers (7545087) with 3/4-10 x 5.0”
long hardware. Hand tightened the hardware.
Lift the reflector. Position the reflector’s universal brackets in place with the mount universal
brackets. From the one side of the reflector and mount assembly, drive the 1”-8 bolt through
the central hole. Align the universal brackets on the other side of the reflector and add second
1”-8 bolt. Add 1” washers and nuts on both bolts. Hand tighten them.
Installation Procedures
Reflector to Mount
Assembly
Step 1
Step 2
49
Universal
Bracket
Universal
Bracket
Spacer
Spacer
Figure 64
Figure 65
Figure 66