Installation guide

40
2. Removing the electric board
(1) Remove the locking screws at the top
and bottom and ground screw, then pull
board out.
3. Removing the manifold
• Remove the electric board and fixing plate
of the ground-fault circuit interrupter in
advance.
(1) Remove the locking screw of the gas
electromagnetic valve and the manifold
pipe.
(2) Remove the 2 locking screws of the
transformer, then pull out.
(L)WH42_56(39_44)_E 05.9.26, 7:48 PMPage 40 Adobe PageMaker 6.5J/PPC