Installation guide

44
7. Removing the heat exchanger
• Remove the electric board, manifold,
mixing tube block and connectors in
advance.
(1) Remove the 3 locking screws at the
bottom of the burner case.
(2)Remove the 2 case top plate locking
screws.
(4) Pull up the mixing tube block to the
upper section and remove it.
(3)Remove the 3 locking screws at the flue
collar and adapter, pull out the heat
exchanger.
(L)WH42_56(39_44)_E 05.9.26, 7:48 PMPage 44 Adobe PageMaker 6.5J/PPC