User Manual

Extruder present
temperature
Hot bed present
temperature
Hot bed intended
temperature
Print speed
Fan speed
Extruder intended
temperature
Temperature setup
Hot bed
/Extruder
Print speed
/Fan speed
Total print time
from the beginning
Cancel printing
Print / Pause
Speed setup
Load /
unload filament
Print completion
percentage
File name
Parameter interface
(only 9 parameters)
Auto leveling
Manual leveling
Offset value
Save
Control interface
Stop leveling
Auto Leveling Manual Leveling
CH Fila Pre-Heat
Stop loading /
unloading filament
Temperature
setup
Set the length of filament
to load or unload
Set the speed of loading
or unloading
Set temperature
value
Start/Stop
pre-heat
Hot bed
Extruder
Temperature
setup
Return
Upward
Confirm
print
Downward
15 characters maximum
Manual Print File
Motor
Position
value
Home
Disable
motor
Stop
The distance
of movement
Downward or
upward
V1.0
Print Setup
User Manual
Thank you for choosing Anet 3D printer.
Read this User Manual and watch our installation video carefully
and thoroughly before operating the printer for the first time.
Take good care of this User Manual.
Shenzhen Anet Technology Co., Ltd.
Add: Floor 1, 2 and B area of 3, the 4th Factory Building, Xiangli Ind. Park, No.1
Xiangli Road, North of Qinghu Road, Longhua Str., Longhua Dist., Shenzhen.
Tel: [phone]
Email: [e-mail]
Anet ET5 X