User's Manual

IMPORTANT NOTES:
• No solvents or abrasive cleaning products should be
used. All external and internally accessible moving parts
should be lubricated using light synthetic oil only.
• All threads on the ANGEL, except those for the ANGEL
accessory mountings at the base of the grip frame are metric.
• ANGEL accessory mountings use industry standard
10/32 UNF at centres 0.75” (20mm).
• When inserting screws into the bottom of the grip frame
the screw thread length must not exceed 0.375” (10mm)
otherwise damage will occur to the electronics.
• We recommend that you remove the righthand cheek cover
and battery when inserting these screws and ensure that the
screws do not project into the circuit board cavity when fitting.
• The ANGEL should never be immersed into water
otherwise damage may occur to the electronics.
General care
& cleaning
The ANGEL is designed for minimum
maintenance and requires far less lubrication
and greasing of internal parts than other high
performance markers.
For external cleaning of the ANGEL we
recommend the use of a water moistened
cloth. The only oil that is suitable for use in
external cleaning is ANGEL Love Juice or
other synthetic oil, which again should only
be applied sparingly using a cloth. Never
use hydrocarbon based oils, such as WD40,
Vaseline, Duck Oil, Plus Gas, etc to clean or
lubricate the ANGEL as this will damage the
internal seals.
Internal lubrication of the ANGEL can be
achieved without disassembly by removing
your regulator and simply adding a couple of
drops of ANGEL Love Juice oil to your ASA
adapter. Once this has been done re-attach
your regulator as per the instructions on page
6 and shoot the ANGEL 10 times. This will
then disperse the lubricant to all the moving
parts of the ANGEL. This should be done
every 10,000 shots for ANGELs that are used
regularly, or in cases of prolonged spells of
infrequent use, prior to each occasion you
use your ANGEL.
Internal greasing of your ANGEL is required
after disassembly to avoid damage to internal
parts during re-assembly. The only grease
suitable for this purpose is ANGEL Love
Juice Extreme Grease.
For full details on oiling or greasing the
ANGELs internal parts please go to:
http://wdp.tv/e_blast07/140507-news/
may07-news.html#lube
ADHERE STRICTLY TO THESE
AND ALL OTHER SAFETY
INSTRUCTIONS AND GUIDELINES
·
Ensure a barrel blocking device is fitted
to the ANGEL.
·
Ensure the hopper is removed from
the ANGEL.
·
Ensure that there are no paintballs
in the ANGEL.
·
Paintball industry standard eye/face/ear
and head protection designed specifically
to stop paintballs and meeting ASTM
standard F1776 (USA) or CE standard
(Europe) must be worn by user and any
person within range.
·
SHOULD YOU BE UNSURE AT ANY STAGE
YOU MUST SEEK EXPERT ADVICE.
15
READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL. SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.