User's Manual

PROBLEM SOLUTION PAGE
BREAKING PAINTBALLS
Is the paint too fragile? Use less fragile paint.
Is the barrel bore correct for the paint? Use a suitable barrel.
Is the paint swollen, cold or hot? Review your storage of paint.
Are the ANGEL Eyes switched on? Switch ANGEL Eyes on 5
Are the ANGEL Eyes functioning? ANGEL Eyes Test. 5/17
Is the loader battery weak/dead? Replace batteries.
Is a suitable working loader tted? Check loader specications.
Is the correct paint type selected? Change Paint Type settings. 12
Is the rate of re set too high? MROF Adjustment. 12
Are the rubber nger detents functioning? Clean or replace. 17
Is the paint too fragile for the loader? Change paint to tougher grade.
CHOPPING PAINTBALLS
Is the loader battery weak/dead? Replace batteries.
Is a suitable working loader tted? Replace loader.
Is the loader dirty? Clean loader.
Are the paintballs swollen? Replace the paintballs.
Are the ANGEL Eyes switched on? Switch ANGEL Eyes on 5
Are the ANGEL Eyes functioning? ANGEL Eyes Test. 5/17
Is the correct paint type setting selected? Change Paint Type settings 12
Is the Rate Of Fire set too high? MROF Adjustment. 12
Are the rubber nger detents functioning? Clean or replace. 17
FIRING TOO SLOWLY
Is the rate of re set correctly? MROF Adjustment. 12
Is the loader battery weak/dead? Replace batteries.
Is a suitable working loader tted? Replace loade.
Is the loader dirty? Clean loader.
Are the ANGEL Eyes switched on? Switch ANGEL Eyes on 5
Is the correct paint type selected? Change Loader Type settings 12
Is the Rate Of Fire set too low? MROF Adjustment. 12
EXCESSIVE NOISE / GAS CONSUMPTION
Is the valve Dwell set correctly? Dwell Adjustment. 11
Is the LPR pressure set correctly? LPR Adjustment. 20
Is the exhaust valve worn? Exhaust Valve replacement. 22
Is the barrel bore correct for the paint? Use a suitable barrel.
26
READ ALL WARNINGS BEFORE ATTEMPTING ANY WORK ON YOUR ANGEL. SHOULD YOU BE UNSURE AT ANY STAGE YOU MUST SEEK EXPERT ADVICE.