User's Manual

AC adapter
4
F
eatures
P
arent Unit
Nursery Unit
AC adapter
Installing Batteries in Nursery Unit
•
The Nursery Unit requires four AAA alkaline batteries in case of AC power failure (included).
T
•
o insert batteries, remove the battery cover on the bottom of the unit and insert the batteries matching positive (+)
to positive (+) and negative (-) to negative (-) and replace the battery cover.
Insert
•
the AC adapter into the Nursery Unit and plug the adapter into an electrical outlet. Unit will run off of the AC
adapter unless there is a power outage, in which case the unit will begin using the batteries.
Replace
•
the batteries when the Low Battery Indicator flashes. If the batteries are not replaced, the monitor
will stop working.
•
IMPOR
TANT:Use only the AC adapters included with your monitor. Do not use these adapters with any other equipment.
Channel
selection
Ch.A-
Ch.B-
Ch.C-
Out of range (orange)
Bar graph LEDs
Sound Level / Alarm
/ Charging indicators
(green)
Volume / Power
-High
-Medium
-Low
-Off
Power / Low
batteries (green)
Speaker
DC 7.5V IN
Battery compartment
3 x AAA rechargeable
batteries (NiMH)
Channel
selection
Ch.A-
Ch.B-
Ch.C-
Out of range LED (orange)
Mode select
- Sound, Movement & Tic
- Tic Off
- Sound only
Movement alarm LED (green)
Power / Low batteries (green)
Microphone
POWER ON / OFF
Alarm sound speaker
Sensor pad socket
Sensitivity adjustment dial
DC 7.5V IN
Battery back up
compartment
(4 AAA alkaline batteries)
Installing Batteries in Parents Unit
•
•
TheParents Unit requires three AAA rechargeable NiMH batteries (included).
T
o insert batteries, remove the battery cover on the back of the unit and insert the batteries matching positive (+) to
positive (+) and negative (-) to negative (-) and replace the battery cover.
Lea
•
ve the AC adapter plugged to the Parents Unit for 15 continuous hours before using your monitor to fully charge
rechargeable batteries.)
Recharge
•
the batteries when the Low Battery Indicator flashes and turns orange instead of green by plugging in the AC
adapter.
The
•
AC adapter can also be used as an alternative operation power source.
•
IMPOR
TANT:Use only the AC adapters included with your monitor. Do not use these adapters with any other equipment.
Night light
ON/ OFF
Night light
button
AC601Model:
7.5V
150mA
Sensor
pad
Sensor
pad
AAA
AAA
4x1.5V
7.5V
150mA
AC601AC601Model:
ivitySensSensit
&Sound Movement
Tic OffTic
Off
Sound Only