User's Manual

9
Tips For Using Your Monitor
When the monitor is in use, do not use a crib mobile or other crib accessories that may produce vibrations.
Other sources of vibrations may include fans, washing machines, loud music, etc. These sources of vibration
may interfere with the performance of your Angelcare® monitor and the alarm will not sound if it continues
to detect any movement. Be sure all vibration sources are eliminated before using the monitor.
There are several reasons you may experience false alarms. The most common reason is the Nursery Unit
has not been turned off after you have removed your baby from the crib. Another reason is the Sensor Pad has
not been placed under the mattress properly. Be sure the Sensor Pad is on a flat, hard surface with the blue
side facing up. The sensitivity level may also need to be adjusted. Refer to the Movement Sensitivity
Adjustment section.
Your monitor can be used in any crib that is stationary and designed to safely hold a baby. If your crib has a
spring or slat base you will need to place a piece of Masonite board under the pad. This support must be at
least 13 inches long on all four sides and 1/4 inch thick. Only use your Angelcare® monitor in a stationary
sleeping environment such as a crib where the Sensor Pad can rest on a hard, flat surface.
• Please note the difference between the Low Battery Indicator and the Alarm Indicator on the Nursery Unit.
The low battery indicator is a rapid ticking sound and the green low battery indicator light slowly flashes. The
Alarm Indicator is a loud beeping sound and the green alarm indicator light flashes rapidly.
When unplugging the AC adapter from each unit, be sure the unit is switched to the off position. If it isn't,
the unit will revert to battery mode if batteries are installed.
You can use rechargeable batteries, however, a rechargeable battery cannot be recharged by plugging in the
AC adapter. Remove batteries from the unit to recharge.
The range of this monitor is approximately 820 feet (250 meters). However, the range will vary depending
on the surroundings. Test the range before use.