User guide

ManualsBrandsAngelcare ManualsProducts for childrenAC401 Deluxe

5.7 - ALARM SETTINGS

Allows you to select your preferred alarm mode.

IMPORTANT

When in MENU or SUB-MENU mode NO

sound, alarm or vibration will be emitted

from either the Parent Unit or the Nursery

Unit even if they were activated before

pressing the MENU or SUB-MENU mode.

IMPORTANT

Vibration option will work when the

following alarm functions are activated:

• Out-of-range

• Temperature alert

• No movement detection

for 20 seconds.

Sound alarm will replace vibration

mode when the Parent Unit is

in its Charging Cradle.

Sound alarm

and vibration

Vibration only (the alarm will

not sound on Parent Unit but

it will on Nursery Unit).

5.8 - HOLD

Allows you to put your Angelcare monitor on HOLD.

1) Press and hold the Down Volume

arrow for 2 seconds.

The Hold Icon will appear on the

screen. The Parent Unit will emit a

double beep every minute to remind

you that your monitor is on HOLD.

2) To deactivate this function, press

and hold the Down Volume

arrow for 2 seconds.

1) Press MENU button 4 times.

The Nursery Unit Indicator

will blinks.

2) Using the arrows, select

the desire notification option.

NOTE:

Vibration mode not available in some countries.

IMPORTANT

When your monitor is in HOLD mode, the movement alarm will not go off and the sound

will not be transmitted. When your monitor is in Sound only mode, the HOLD function

cannot be activated.

IMPORTANT

When your monitor is on HOLD, the movement-detection feature and movement alarm

are disabled.

ADJUST SOUND LEVEL PUT IN TEMPORARY MUTE MODE

Raise volume

Lower volume

Press once the

Sound/Off button

to mute sound

(see section 5.6).

1) Press MENU button 3 times.

Sensitivity Level icon will appear.

2) With the arrow keys select desired

microphone sensitivity level.

3) Press SELECT button to confirm

your choice.

TO ADJUST SOUND SENSITIVITY (VOX):

The sensitivity of the microphone is adjustable and has 4 levels (the most sensitive is

level 4). This means that sound will only transmit based on the level that you set.

VOX

Sensitivity

Level

(4 levels)

5.6 - TEMPORARY MUTE

Allows you to put your monitor

in temporary Mute mode.

TO ACTIVATE MUTE:

Press the SOUND/OFF button.

TO UNMUTE:

Press the SOUND/OFF button again

to unmute sound.

NOTE:

On the Parent Unit,

the Mute ICON will blink.

After 2 minutes the sound function

will be automatically reactivated.

If you press too long on the

SOUND/OFF button it will shut

down the Parent Unit.