Manual

ManualsBrandsAngelcare ManualsProducts for childrenAC701

Please DO NOT return this product to the store. For assistance please

contact our helpline on 0845 009 1789 or email helpline@babyhelpline.co.uk

Mon – Fri 10am – 4pm, excluding bank holidays.

OWNER’S MANUAL

DIGITAL TOUCHSCREEN MOVEMENT

& SOUND BABY MONITOR

Model AC701

FOR YOUR PEACE OF MIND

Movement Alarm

Your monitor comes with the movement alarm activated.

When switching on your monitor it will alarm, with or without

the Sensor Pad plugged in, if no movement is detected.

Deactivate the movement function to use the monitor without

the Sensor Pad.

Batteries

Insert the enclosed rechargeable batteries into the Parent

Unit. If inserted incorrectly the Parent Unit will not charge

when placed in the charging cradle. The battery icon will flash

briefly on the Parent Unit screen to indicate charging.

Cord Safety

Ensure the Nursery Unit is at least 1 metre away from your

baby’s cot. The Sensor Pad cord must always be kept out of

reach of baby and secured using the cord cover kit provided.

DON’T

FORGET

IMPORTANT ADVICE FOR INITIAL SETUP

PLEASE FOLLOW THE INSTRUCTIONS CAREFULLY FOR CORRECT SETUP

Summary of content (17 pages)

PAGE 1
FOR YOUR PEACE OF MIND OWNER’S MANUAL DIGITAL TOUCHSCREEN MOVEMENT & SOUND BABY MONITOR Model AC701 IMPORTANT ADVICE FOR INITIAL SETUP DON ’T FORG ET Movement Alarm Your monitor comes with the movement alarm activated. When switching on your monitor it will alarm, with or without the Sensor Pad plugged in, if no movement is detected. Deactivate the movement function to use the monitor without the Sensor Pad. Batteries Insert the enclosed rechargeable batteries into the Parent Unit.
PAGE 2
TABLE OF CONTENT Warning Warnings.....................................................................................3 AC701 SETUP REQUIREMENTS.......................................................8 STEP 1 - Charging the Parent Unit (15 hours).............................9 1. THIS PRODUCT CANNOT REPL ACE RESPONSIBLE ADULT SUPERVISION. This product is designed to aid in the monitoring of your child.
PAGE 3
when product is stored for long periods of time or when batteries are exhausted. Dispose exhausted batteries properly. DO NOT recharge non-rechargeable batteries. Rechargeable batteries are ONLY to be charged under adult supervision. Keep all batteries away from children. 15. Important Safety Instructions 15.1 Read these instructions - All the safety instructions should be read before the product is operated. 15.2 Keep these instructions.
PAGE 4
16. IMPORTANT SAFETY INSTRUCTIONS RELATED TO USE OF BATTERIES 16.1 Use O N LY the t ype and size of batteries specified in the owner’s manual. There is a risk of explosion if batteries are replaced with an incorrect type. 16.2 U s e O N LY A A A r e c h a r g e a b l e batteries and/or the AC Adapters provided for the Parent Unit. You must use only rechargeable batteries in the Parent Unit. DO NOT use alkaline batteries or you will severely damage the unit. 16.
PAGE 5
TOUCHSCREEN MOVEMENT SETUP REQUIREMENTS & SOUND MONITOR STEP 1 - Charging the parent unit (15 hours) Model AC701 INCLUDED: 5 6 Rechargeable Parent Unit Charging Cradle 3 4 2 Warning Never use regular alkaline batteries in the Parent Unit; they may explode. 1 1 1) Slide the button to unlock and open the battery cover. Insert the Rechargeable Batteries (included) as per picture.
PAGE 6
STEP 2 - INSTALLING THE sensor pad 2.2 Select the crib leg you will be using to secure the cord covers Recommended 6 5 3 4 2 1) Use the crib leg by the wall closest to the Nursery Unit (Fig 1). In cases where the Nursery Unit is across the room, use the leg closest to the Nursery Unit to position the covered wire (Fig 2). It is always preferable that the covered cord run along a wall.
PAGE 7
6 STEP 3 - Setting up the Nursery Unit 8 cm 1 6 1) Unscrew the battery cover and insert 2 AA Alkaline Batteries (not included). 6) Place the 6th cord cover approximately 8 cm from the edge of the mattress support. 7 3) Connect the AC Adapter to the Nursery Unit and plug into an electrical outlet. 7) Snap together the remaining cord covers that will run along the floor. CLIC! 4 2) Place the Nursery Unit at a minimum of 1 m away from the crib.
PAGE 8
STEP 4 - Turning ON your Monitor 2 1 STEP 5 - Testing and getting to know your monitor 1) Press the Parent Unit ON/OFF button to open and display normal mode. The Angelcare® monitor can be used with the pre-program factory settings or you can also customize your settings to your preference. 2) Push and hold the Nursery Unit left ‘wing’ button for 2 seconds. Note: All changes and adjustments made in the settings mode will not be activated unless you confirm them by pressing the Return icon.
PAGE 9
To stop the alarm OR 5.2 - SOUND OR Press Nursery Unit’s Hold button (see step 6.5) Press any key on the Parent Unit to put on Hold (see step 6.5) Hold down left ‘wing’ button for two seconds to turn OFF the Unit Place your hand back on the mattress. To adjust THE SENSOR PAD sensitivity level: 1 4 1) Press Settings icon to access setting mode. Level 1 Raise volume level (+) Press + or - buttons to adjust the volume level.
PAGE 10
YOU ARE NOW READY TO USE YOUR MONITOR STEP 6 - Activating and deactivating additional functions The Angelcare® monitor can be used with the pre-program factory settings or you can also customize your settings to your preference. The Angelcare® monitor is multifunctional. It can be use in different combinations according to your needs. MULTIFUNCTIONAL SOUND & MOVEMENT: Allows you to detect the baby’s movement & sound while using both Parent Unit and Sensor Pad.
PAGE 11
6.1 - Voice Activation (Vox) OR CONTINuOUS SOUND MODE 6.2 - ECO MODE Allows you to select your option on how you monitor sound: Allows you to reduce the electro-smog and save battery life. VOX (voice activation picks up sound based on the selected sensitivity level settings) or Continuous (sound monitoring is continuously on, picking up all sounds). TO ACTIVATE ECO mode: 3 1 1 1) Press the VOX icon to activate or deactivate the VOX function.
PAGE 12
6.4 - Alarm TO Activate THE temperature alarm: Allows you to select your preferred alarm mode for the Parent Unit. 1 1) Press the Settings icon to access setting mode. 3 1 1) Press the Temperature Alarm icon to activate or deactivate the high and low temperature alarm. ON 2) Press the Alarm icon, current alarm mode icon will blink. Then press again to select the alarm mode as the display changes for various modes. 2 OFF 3) Press the Return icon to confirm your choice and return to normal screen.
PAGE 13
6.6 - MUTE Troubleshooting Allows you to activate the MUTE function. Taking Care of your Rechargeable Batteries TO ACTIVATE MUTE: Press the Sound Icon. ON OFF TO DEACTIVATE MUTE: Press the Sound Icon to deactivate. Note: The MUTE icon will blink on the Parent Unit. 6.7 - NIGHT LIGHT Loss of connectivity OR Allows you to use your monitor as a night light. • Ensure that you fully charge your batteries for 15 hours before their first use.
PAGE 14
FALSE ALARMS • Turn OFF the Nursery Unit. • Verify the connection between Sensor Pad and Nursery Unit. Unplug and reconnect the cord. • Make sure there is no bedding between mattress and Sensor Pad. • If the crib has a spring or slat base, place a hardboard between the crib base and the Sensor Pad measuring at least 33 x 33 cm and 6 mm thick. • Make sure Sensor Pad is positioned as described under the setup requirements. Sensor Pad Sensitivity level may need to be adjusted, refer to step 5.1.
PAGE 15
Technical specifications They may only be replaced by 2 AAA NIMH rechargeable batteries. Range: Open field: up to 250 m Batteries: Power Supply: 2 AA Alkaline batteries (not included) or 100-240VAC/5VDC Adapter for Nursery Unit. 2 AAA rechargeable batteries and 100-240VAC/5VDC AC adapter for Charging Base for the Parent Unit. Caution: To reduce the risk of electric shock, do not expose this product to rain or moisture. Risk of explosion if battery is replaced by an incorrect type.
PAGE 16
30 31
PAGE 17
This Angelcare Baby Monitor is a Personal Care Product. Please DO NOT return this to the store, but contact us initially for advice and assistance: Angelcare Helpline on 0845 009 1789 Website: www.angelcare.co.uk Email: helpline@babyhelpline.co.uk NOTE: Helpline is open Monday to Friday, 10am to 4pm, excluding bank holidays.