Operation Manual

TO TEST THE SOUND:
Ask someone to speak into the Nursery
Unit or place the unit near a radio to ensure
that sound is being picked up.
TO ADJUST THE SOUND:
5.2 - SOUND
HOW TO CHECK THE BATTERIES:
Unplug the AC Adapters from both units.
• If the green light on the Nursery Unit does not show, replace the batteries.
• If the Parent Unit and its screen do not light up, recharge the batteries.
IF YOU HEAR NO SOUND:
• Check that both units are switched ON.
• Check that both units are plugged
into a working electrical outlet.
• Check the batteries in both units
(replace or recharge them as necessary
per unit).
• Bring the Parent Unit closer to the
Nursery Unit.
IMPORTANT
To avoid feedback (whistling), keep
both units at least 10 ft (3 m) apart.
HOW TO CHARGE THE BATTERIES IN THE PARENT UNIT:
Leave the Parent Unit in the Charging Cradle
to fully charge the unit. Although the batteries
at 1/3 capacity works normally, we recommend
that you fully recharge them.
1/3 full 2/3 full full
PARENT UNIT BATTERY ALARM
• Alarm activates when batteries need to be recharged.
• Parent Unit will emit a beep sound every 20 seconds.
• Battery icon will flash on Parent Unit screen.
Press (+) or (-) buttons to adjust
the volume level.
Level 0
Level 1
Level 2
Level 3
Level 4
Level 5
TO LOWER VOLUME LEVEL TO L0
PUT IN TALK BACK MODE
Raise volume
level (+)
Lower volume
level (-)
Press the
(-) button
to select the
L0 level
(see Step 6.6)
Press and hold
the Talk Back
button to speak
to your baby.
NOTE:
At level L0 the level bar will still appear on
the screen and the icon will blink. If you press
the blinking Sound icon again, it automatically
activates the Mute function. The Bar will disappear
and a cross will appear in the icon screen. To
DEACTIVATE, press the Sound icon again. (Refer
to Step 6.6 for more information on Mute mode).
5.3 - BATTERIES
16