USER'S MANUAL Console Table
PRODUCT ASSEMBLY Hardware List A B C D E 6*35mm 48 pcs 48 pcs 15*10mm 8*30mm 3*12mm 3*14mm F G 4*30mm 4*35mm 8 pcs K 4 pcs L 40 pcs H 2 pcs M 34 pcs I 2 pcs N 4 pcs J 4 pcs 4*16mm 4 pcs 4 pcs 2 sets 300mm 16 pcs 2.
PRODUCT ASSEMBLY Part List Assembly Overview 1 2 6 4 17 5 11 3 10 8 10 10 9 15 13 16 14 12 2/10 X2 7
PRODUCT ASSEMBLY A Step 1 48 pcs A A 1 X3 10 A A 11 12 X2 2 A A 3 1) Lay Top Panel (1), Connect Bar (10), Middle Back Connect Bar (11), Drawer Front Panel (12), Left panel (2) and Right Panel (3) as shown on a flat and soft surface that does not scratch the parts. 2) Screw Cam-bolt (A) into the designated holes on each .
PRODUCT ASSEMBLY F Step 2 8 pcs Step 3 B 8 pcs L 2 pcs M 2 pcs F 13 B 13 15 M 14 L 15 16 14 X2 12 X2 Attach Drawer Side Panel (13 & 14) to Drawer Back Panel (15) by using Screw (F). 1) Insert Drawer Back Panel (16) as per the groove on (13, 14 & 15). 2) Attach Drawer Front Panel (12) to (13 & 14) via Cam-bolt on (12). 3) Insert Cam-lock (B) to the designated holes on (13 & 14) then turn clock-wise to lock onto Cam-bolt.
PRODUCT ASSEMBLY Step 5 D D 10 pcs I 2 pcs K 4 pcs I 7 6 D K Attach Hinge (K) and Magnetic Bar (I) to Door (6 & 7) by using Screw (D) as shown. Step 6 D 8 pcs N1 2 sets D Back side with two holes for magnetic catch N1 5 4 Back side with two holes for magnetic catch Attach Drawer Glide (N1) to Left and Right Divide Panel (4 & 5) by using Screw (D).
PRODUCT ASSEMBLY Step 7 B 8 pcs C 6 pcs 9 B C 10 10 1) Attach Connect Bar (10) to Bottom Shelf (9) via Wood Dowel (C) and Cam-bolt on (10). 2) Insert Cam-lock (B) to the designated holes on (9) then turn clock-wise to lock onto Cam-bolt. Step 8 B 8 pcs C 6 pcs 8 B C 11 10 1) Attach Connect Bar (10 & 11) to Middle Shelf (8) via Wood Dowel (C) and Cam-bolt on (10 & 11). 2) Insert Cam-lock (B) to the designated holes on (8) then turn clock-wise to lock onto Cam-bolt.
PRODUCT ASSEMBLY Step 9 B 4 pcs C 4 pcs 2 C B 8 10 11 1) Attach (8, 10 & 11) to Left Panel (2) via Wood Dowel (C) and Cam-bolt on (2). 2) Insert Cam-lock (B) to the designated holes on (8, 10 & 11) then turn clock-wise to lock onto Cam-bolt. Step 10 B 4 pcs C 4 pcs C B 9 10 10 1) Attach (9 & 10 ) to Left Panel (2) via Wood Dowel (C) and Cam-bolt on (2). 2) Insert Cam-lock (B) to the designated holes on (9 &10) then turn clock-wise to lock onto Cam-bolt.
PRODUCT ASSEMBLY Step 11 8 B 8 pcs C 8 pcs 10 10 9 11 10 3 1) Attach Right Panel (3) to (8, 9, 10 & 11) via Wood Dowel (C) and Cam-bolt on (2). 2) Insert Cam-lock (B) to the designated holes on (8, 9 10 &11) then turn clock-wise to lock onto Cam-bolt. Step 12 C 4 pcs G 4 pcs 4 5 8 C G Attach Left and Right Divide Panel (4 & 5) to Middle Shelf (8) by using Wood Dowel (C) and Screw (G).
PRODUCT ASSEMBLY Step 13 B 8 pcs C 8 pcs J 16 pcs 1 C B 2 4 5 3 1) Attach Top Panel (1) to (2, 3, 4 & 5) via Wood Dowel (C) and Cam-bolt on (1). 2) Insert Cam-lock (B) to the designated holes on (2, 3 4 & 5) then turn clock-wise to lock onto Cam-bolt. Step 14 J 17 Attach Back Panel (17) with Screw (J).
PRODUCT ASSEMBLY Step 15 M L 6 D 4 5 D 7 H E 1) Attach Magnetic Catch (H) to Divide Panel (4 & 5) with Screw (E). 2) Attach Door (6 & 7) to Side Panel with Screw (D). 3) Attach Knob (M) to Door (6 & 7) with Knob Bolt (L). Step 16 N1 N2 Insert Drawers.
