Owner’s Manual Indoor Lighting Fixture Installation Instructions W-012 01/14/04 Please write model number here for future reference: / Veuillez noter le numéro de modèle aux fins de référence ultérieure: / Por favor, incluya el número del modelo aquí para futura referencia:
ASSEMBLY INSTRUCTIONS FOR INDOOR LIGHT FIXTURE Congratulations on your Westinghouse purchase. This fixture has been designed to give you many years of beauty and service. Please email questions and comments to: catalogroom@westinghouselighting.com. NOTE: Carefully unpack fixture and parts. Make sure all parts are included before discarding any packing materials (see figure 1).
FIGURE 1. WIRE CONNECTORS (G) *OUTLET BOX (B) GROUND WIRE (M) CENTER HOLE (D) CANOPY (C) KEY SLOTS (H) MOUNTING SCREWS (A) SOCKET CLIP (E) SOCKET (F) NIPPLE (K) FIBER WASHER (I) METAL CAP OR RUBBER WASHER (IF APPLICABLE) DIFFUSER (J) KNOB (L) Line art shown may not exactly match the fixture enclosed. However, the installation instructions do apply to this fixture.
MOUNTING AND WIRING INSTRUCTIONS NOTE: Underwriters Laboratories (UL) does not require all fixtures to have ground wires. These fixtures meet all UL specifications. 1. Turn off power at circuit box to avoid possible electric shock. 2. Thread mounting screws (A) approximately 1/4 inch into outlet box (B) (see fig. 1). 3. Line up holes in canopy (C) with holes in fiberglass insulation (inside canopy). 4. Run wires from socket (F) through center hole (D) in canopy (C). 5.
LES INSTRUCTIONS D'ASSEMBLAGE DE L'APPAREIL D'ÉCLAIRAGE POUR UTILISATION INTÉRIEURE Félicitations ! Vous avez acheté un produit de Westinghouse Lighting. Cet appareil d'éclairage a été conçu pour durer de nombreuses années. Veuillez envoyer vos questions et commentaires par courriel, à l'adresse suivante : catalogroom@westinghouselighting.com NOTA : Déballez soigneusement l'appareil d'éclairage et les pièces. Assurez-vous que toutes les pièces y sont avant de mettre l’emballage au rebut (voir fig. 1).
FIGURE 1. CONNECTEURS DE FIL (G) *BOITE DE SORTIE DE COURANT (B) FIL DE MISE A LA TERRE (M) TROU CENTRAL (D) CHAPEAU (C) RAINURES (H) VIS DE FIXATION (A) PINCE DE DOUILLE (E) DOUILLE (F) MANCHON FILETE (K) RONDELLE DE FIBRE (I)) CAPUCHON EN METAL OU RONDELLE EN CAOUTCHOUC (SI Y A LIEU) DIFFEUSUR (J) BOUTON DECORATIF (L) Il est possible que le dessin illustré ici ne soit pas la reproduction exacte de l’appareil d’éclairage contenu dans la boîte.
INSTRUCTIONS DE MONTAGE ET DE RACCORDEMENT NOTA : Underwriters Laboratories (UL) n’exige pas que tous les appareils d’éclairage comportent des fils de mise à la terre. Ces appareils satisfont cependant à toutes les spécifications UL. 1. Mettez l’interrupteur de la boîte à fusibles à « OFF » afin d’éviter le risque d’électrocution. 2. Vissez les vis de fixation (A) dans la boîte de sortie de courant (B) d’environ 1/4 de po (voir fig. 1). 3.
INSTRUCCIONES DE MONTAJE PARA EL ARTEFACTO DE ILUMINACIÓN PARA INTERIORES Le felicitamos por comprar este producto de Westinghouse Lighting. Este producto ha sido diseñado para brindarle muchos años de belleza y servicio. Si tiene preguntas o comentarios, por favor envíe un mensaje electrónico a: catalogroom@westinghouselighting.com NOTA: Extraiga cuidadosamente el artefacto y las piezas. Verifique que contenga todas las partes requeridas (consulte la figura 1) antes de descartar los materiales de empaque.
FIGURA 1. *CAJA DE EMBUTIR (B) CONECTORES DE ROSCA (G) ORIFICIO CENTRAL (D) CABLE DE TIERRA (M) DOSEL (C) RANURAS (H) TORNILLOS DE MONTAJE (A) SUJETADOR DEL PORTAL AMPARAS (E) PORTAL AMPARAS (F) NIPLE (K) ARANDELDA DE FIBRA (D) TAPA DE METAL O ARANDELA DE CAUCHO (SI CORRESPONDE) DIFUSOR (J) PERILLA (L) Los dibujos pueden no coincidir exactamente con el artefacto incluido. Sin embargo, las instrucciones de instalación se aplican a este artefacto.
INSTRUCCIONES DE MONTAJE Y CABLEADO NOTA: Underwriters Laboratories (U.L.) no requiere que todos los artefactos tengan cables de tierra. Estos artefactos cumplen con todas las especificaciones U.L. 1. Desconecte el suministro eléctrico en la caja de fusibles para evitar la posibilidad de descarga eléctrica. 2. Enrosque los tornillos de montaje (A) aproximadamente 7 mm (1/4 pulg.) en la caja de embutir (B) (vea la fig. 1). 3.
FIGURE 2. GROUP A: CONNECT TO BLACK HOUSE WIRE GROUP B: CONNECT TO WHITE HOUSE WIRE BLACK WHITE WHITE OR GREY WITH TRACER WHITE OR GREY WITHOUT TRACER BROWN, GOLD OR BLACK WITHOUT TRACER BROWN, GOLD OR BLACK WITH TRACER NOTE: When parallel wire (SPT I & SPT II) is used; the neutral wire is square shaped and ridged, and the hot wire will be round in shape and smooth. (See below.) WARNING Turn off electricity to the mounting site before beginning installation.
CLEANING AND CARE To clean, wipe fixture with soft cloth. Clean glass with mild soap. Spray from chemical cleaners can discolor the finish of fixture. Extend-A-Finish Laquer Conditioner, Item#70295, is recommended once a year to clean, condition, and protect fixture. Do not use scouring pads, powders, steel wool or abrasive paper to clean this fixture.