Installation Guide

SP-SS V2 01.08.14
O ring
1/5” to 1” Female reducer
O ring
TROUBLESHOOTING
Always disconnect the pump from the power supply before handling.
If the pump, optional water feature fail to operate:
 Check to make sure the power cord is plugged in and the
receptacle has stable power supply running to it.
 Check to ensure water level is above sensor.
 Check the tubing for kinks or obstructions.
 Check if water feature outlet or tubing is clean and clear.
 Check the front cover of pump for obstructions.
If water flow has not returned:
 Remove front cover and impeller cover to access rotor area.
 Rotate the rotor to ensure it is not broken or jammed.
Remove the rotor to check it is free from any debris.
 Rinse the cover and re-assemble.
LIMITED WARRANTY
These components are warranted to the original user against defective materials
and workmanship for a period of 12 months. Our limited warranty does not cover
any costs associated with the installation or removal of products subject to warranty
claims or the cost of return. The warranty will commence from the date of
purchase. Replacement liability is limited to any part or parts of the unit which have
failed due to defective material or workmanship. Proof of purchase is required for all
claims against the limited warranty. This warranty does not extend to damage of
the product or part resulting from accident, misuse, alteration, neglect, abuse,
improper installation or normal wear and tear to the product(s). This limited
warranty extends only to the original user of the product.
Safe Stop™ Fountain Pump
Instruction Manual SP650 / SP850
THANK YOU FOR BUYING AN ANGELO DECOR PRODUCT.
PACKAGE CONTENTS
½” Output
¾” Output
Fountain Pump
3M (10’) Power Cord (SP650)
5M (15’) Power Cord (SP850)
IMPORTANT - BEFORE YOU BEGIN:
This pump is intended for use in free-standing fountains and water
features in “clean water applications”.
It is not compatible with salt water.
It should be installed properly in to these features based on this
instruction manual to ensure this feature works as intended.
The Safe Stop™ feature uses a sensor designed to detect improper
water levels, preventing your pump from running dry and overheating.
Water level must be at or above the level of the sensor for the
pump to resume operation. A few seconds delay may result after
adding water.
QUESTIONS?
PLEASE DO NOT RETURN THE ITEM TO THE STORE.
Please visit our website www.angelodecor.com for more information and
videos on how to assemble and properly use your product.
For more information on this and other products, please visit our web site:
www.angelodecor.com
PLEASE DO NOT RETURN THIS UNIT TO THE STORE.
To contact us regarding this unit, your options include:
Email:[e-mail] | Phone: (780) 453 - 6646 | Fax: [phone]
Angelo Décor International Inc. | 15840 – 118
th
Avenue | Edmonton, AB |T5V 1C4
1
Sensor
4