Instructions / Assembly

USE AND CARE
This product is designed and manufactured for convenience and durability.
When properly maintained it will provide years of enjoyment. For fountains and
birdbaths, all basins should be cleaned periodically to prevent mineral deposits and
contamination. Use a soft cloth and a 30% / 70% mixture of vinegar and warm water
(or a mild detergent and warm water) if needed. Do not use harsh chemicals as
this will damage the finish and material, and void your warranty. Add clean
water regularly and ensure the pump is always fully submerged. Disconnect and
empty the item of any water if it will not be used for an extended period of time.
When placing this product, we recommend choosing a location free from falling
debris (leaves, branches, etc.) and one that will provide periods of shade during
the day to help prevent excessive exposure to the sun. We recommend applying
a clear sealer to the product annually, to help protect both the finish and material.
These sealers can be found at home improvement retailers in brush-on and spray-
on varieties. Follow the manufacturer’s directions for application and best results.
This product is not intended for use in temperatures below 5ºC (41ºF).
Empty, dry and store this product prior to these temperatures setting-in.
WINTER STORAGE
As a result of the damage that can be caused by the freeze and thaw cycle, we advise
drying and storing this product in a warm location during freezing temperatures.
Fountain bowls, risers, pedestals, tops / finials and other components that
collect or sit in water should not be left outside in freezing temperatures.
Any piece that has the ability to hold water, snow or ice, or any part that is placed
directly on the ground surface can be affected. Any piece that has been continuously
submersed in water, such as the bowl or riser requires adequate time to dry properly
before it is stored.
If you must leave the product out, here are some tips to help protect it:
• Empty and allow ample time for the product to dry.
• Remove the pump, riser, top and any small components and store indoors.
• Elevate any parts that are in contact with the ground using small strips of wood
(or another material that will not retain moisture).
• When completely dry, cover the product, making sure that water, ice or snow
will not accumulate in any of the basins. Seasonal covers can be purchased or
the item can be wrapped in burlap or another absorbent material (like an old
blanket or towel) and then covered with a tarp or plastic.
Check the item periodically to ensure the cover is in place and that water, snow or
ice is not accumulating.