User Manual

Combination Oven Installation and Operation Manual 69
Section 5
Operation
If preheating has to be ended prematurely, press
the button. >>>
If you need to change the pre-heating
temperature, press the button and proceed as
indicated on page 39. >>>
4. Place the foods for cooking inside the cooking
chamber and close the door to start the cooking
cycle.
The display will show this screen. >>>
IMPORTANT _________________________
The light inside the cooking chamber
remains on throughout the cycle to allow
the food to be viewed.
5. To feed steam into the chamber while cooking is
in progress, press the button. >>>
6. Use the knob to set the steam injection time
from 1 to 59 seconds. The setting is retained for
the next cooking processes. >>>
This function is active only if the “Multi-cooking”
function has not been activated. Otherwise it
will display the times of the “Multi-cooking”
function”.
end preheating
modify
temperature
steam
injection
display
measured data
Time
manual cooking
Cooking temp
Fan speed
Cooking time/”Core”
temperature
ECO/PLUS
Percentage humidity or steam
vent percentage
display
measured data
steam
injection
modify
temperature
time left