User Manual

86 Combination Oven Installation and Operation Manual
Section 7
Parts Replacement
DECOMMISSIONING THE APPLIANCE
WARNING
Before performing any service
that involves electrical connection or
disconnection and/or exposure to electrical
components, always follow the Electrical
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to comply can cause
property damage, injury or death.
When decommissioning the appliance, a series
of procedures must be carried out to ensure the
appliance and its components are no longer an
obstacle and are not easily accessible.
To ensure the appliance does not present a hazard
for people or the environment, all energy sources
(electricity, etc.) must be disconnected and made
unusable, and any liquids present must be drained
(lubricants, fl uids, etc.).
Place the appliance in a suitable area which is not
easily accessible with barriers to prevent anyone
from accessing it.
When scrapping, sort all components by material
type and dispose of them separately in accordance
with the relevant local recycling requirements and
regulations.
IMPORTANT _________________________
Do not dump non-biodegradable
products, lubricating oils, and non-
metallic components (rubber, PVC,
resins, etc.) in the environment. Dispose
of them in compliance with all relevant
laws, regulations, and local recycling
requirements.