User Manual

Combination Oven Installation and Operation Manual 23
Section 4
Handling and Installation
WASHING SUPPLY CONNECTION
To carry out this operation, proceed as follows:
1. Connect red pipe (A) to pipe (B) and fi t cone (C)
into the cleaner tank (D).
2. Connect blue pipe (E) to pipe (B) and fi t cone
(C) into the sanitizing cleaner tank (F).
Use the cleaner and sanitizer supplied by the
appliance manufacturer for the best results.
The chemical composition of the products referred
to above is as follows:
Cleaner: caustic soda, concentration less than 20%.
Sanitizing cleaner: containing citrates and organic
sequestering agents, less than 15%.
IMPORTANT ________________________
The use of products with different
compositions may damage the system and
the oven walls, and any residues deposited
may contaminate foods.
CONNECTING THE GAS EXHAUST VENT
IMPORTANT _________________________
Make the connection in compliance with
all relevant local and legal requirements,
using appropriate and recommended
materials.
IMPORTANT _________________________
Maximum exhaust gas temperature at the
outlet is approximately 750°F.
CONNECTING TO A
FAN EXTRACTOR HOOD
Position the appliance underneath hood (C) as
shown in the diagram.
IMPORTANT _________________________
The gas supply valve must open
automatically when the fan of the
extraction system is switched on.
A
E
C
D
F
B
Minimum
12″
C