User Manual

Combination Oven Installation and Operation Manual 71
Section 5
Operation
If preheating has to be ended prematurely, press
the button. >>>
If you need to change the pre-heating
temperature, press the button and proceed as
indicated on page 40. >>>
4. Place the foods for cooking inside the cooking
chamber and close the door to start the cooking
cycle.
The display will show this screen. >>>
IMPORTANT _________________________
The light inside the cooking chamber
remains on throughout the cycle to allow
the food to be viewed.
When the burner is lit, the specifi c icon is
illuminated on the display.
5. To feed steam into the chamber while cooking is
in progress, press the button. >>>
6. Use the knob to set the steam injection time
from 1 to 59 seconds. The setting is retained for
the next cooking processes. >>>
This function is active only if the “Multi-cooking”
function has not been activated. Otherwise it
will display the times of the “Multi-cooking”
function”.
end preheating
modify
temperature
steam
injection
display
measured data
Time
manual cooking
Cooking temp
Burner lit icon
Fan speed
Cooking time/”Core”
temperature
ECO/PLUS
Percentage humidity or steam
vent percentage
display
measured data
steam
injection
modify
temperature
time left