User Manual

88 Combination Oven Installation and Operation Manual
Section 7
Parts Replacement
REPLACING THE FUSE
WARNING
Before performing any service
that involves electrical connection or
disconnection and/or exposure to electrical
components, always follow the Electrical
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to comply can cause
property damage, injury or death.
To perform this operation, proceed as follows.
WARNING
Disconnect the power supply
before replacing fuses.
1. Undo screws and remove side panel (A).
2. Open fuse-holder (B) and replace damaged fuse (C).
3. Replace fuse-holder and side panel when the
operation is complete.
B
A
C
CHANGING THE LAMP
WARNING
Before performing any service
that involves electrical connection or
disconnection and/or exposure to electrical
components, always follow the Electrical
LOCKOUT/TAGOUT Procedure. Disconnect
all circuits. Failure to comply can cause
property damage, injury or death.
To perform this operation, proceed as follows.
WARNING
Disconnect the power supply
before replacing lamps.
1. Undo screws and remove lamp cover (A).
2. Remove and replace lamp (B).
WARNING
During the procedure, take
care not to touch the lamp directly; wear
protective gloves if necessary.
3. Replace lamp cover (A) and retighten screws
when the operation is complete.
Note: the appliance wiring diagram location can be
found on the “Safety Lable and Sign Location” page.
B
A