User Manual

3
Warnings
Please read and follow these instructions, and keep this manual in a safe
place.
Do not attempt to disassemble or repair the equipment—doing so will
void the warranty, and Angler will not be responsible for any resulting
damage.
Handle the unit with care.
Clean the unit with a soft, dry cloth.
Keep this unit away from children.
Use only parts provided by the manufacturer.
Make sure the item is intact and that there are no missing parts.
All photos are for illustrative purposes only.
User Instructions
The indexed flex rod holes are a guide to assembling a variety of dierently
shaped softboxes: rectangular, square, strip (long, thin shape), narrow strip
(longer, thinner shape), and octagonal.
• The flex rod holes labeled “A” are used when assembling a square or
rectangular softbox.
• The holes labeled “B” are for a very narrow strip softbox.
• The holes labeled “C” are for a normal strip softbox.
• The holes labeled “8” are for assembling an octagonal softbox. For
assembling the softbox, see the manufacturer’s instructions.
Note: Rubber feet on the tightening screws of the 7464-DYN speed ring
may become overheated and melt when used with an Omni-light or any other
continuous hot light. Remove the feet before use to prevent damage.