26 in.
Setting Up the BoomBox 1. Place the stand mount onto a light stand’s 5/8-inch stud. Tighten the locking knob until secure. 2. Press down the locking button, and swing the mounting bracket into position until it snaps into place. 3. Attach the BoomBox to the stand mount by aligning the thumbscrew with one of the mounting bracket holes. Tighten until secure. 4. Open the BoomBox, and push the center ring over the shaft until it’s it’s all the way in, just like an umbrella.
6. Optional: Attach the diffuser by pressing the touch-connect strips against the inner rim of the BoomBox. The diffuser softens and spreads the light for an even and flattering effect. It can be used with or without the deflector plate. 7. Loosen the tension knob, and slide your flash’s foot into the cold shoe. Tighten the tension knob until the flash is secure. 8. Use the thumbscrews to adjust the height of the BoomBox and the position of the cold shoe.
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
