User Manual

7
Attaching the Camera Bracket
The adjustable camera bracket attaches your
camera to the ring light for tripod-mounted
shooting. It connects to the bottom of the
LED array via two Phillips-head screws.
1. Use a Phillips screwdriver (not included)
to remove the screws from the bottom
of the LED array. Do not remove the
larger screw in the middle—only the two
on the ends.
2. Position the camera bracket behind the
LED array, and align the screw holes on
the bracket with the ones on the array.
3. Insert the two Phillips screws, and fasten
them with the screwdriver.
4. Make sure the two thumbscrews in the
camera bracket are fully tightened.
Attach your camera to the camera
bracket via the stud on 1/4"-20 set
screw. Make sure your camera is secure
before continuing to the next step.
1
2
4