beauty reflector ADAPTERS INSTRUCTIONS
Introduction Congratulations on your purchase of an Angler Beauty Reflector Mounting Adapter. The Angler Beauty Reflector Mounting Adapter will allow you to mount your Angler Beauty Reflector onto your strobe light. The Angler Beauty Reflector reflects and diffuses light to create a shadowless effect that offers greater contrast and texture than a softbox or an umbrella. Because beauty reflectors produce a natural-looking catchlight, they are ideal for fashion and portrait photography.
Contents Mounting adapter User manual Highlights Steel or aluminum construction Mounts quickly onto the flash head Allows use of Angler 16ʺ, 20ʺ, 22ʺ, and 27ʺ Beauty Reflectors EGD-DOL EGD-HOL EGD-LPS EGD-SUR All photos are for illustrative purposes only. Flash units, lamps, and lightstands are not included with the Angler Beauty Reflector Adapter unless purchased as a kit.
Setting up the Beauty Reflector In order to mount your Angler Beauty Reflector, you will need to purchase and install the proper mounting adapter. 1. Remove the thumbscrew and washer by rotating the thumbscrew. 2. Slide the mounting adapter into the brackets on the back of the Beauty Reflector.
3. Insert the thumbscrew and washer into the threaded hole and rotate clockwise to tighten. 4. Mount the Angler Beauty Reflector onto your strobe light. Note: For instructions on how to mount your Angler Beauty Reflector, refer to your strobe’s instruction manual.
Specifications EGD-DOL EGD-HOL EGD-LPS EGD-SUR Construction STEEL Aluminum alloy Aluminum alloy STEEL AND RUBBER Weight 0.5 lb. (227 g) 0.3 lb. (136 g) 0.4 lb. (181 g) 0.65 lb.
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
anglerlights.
