User's Manual

INSTRUCTIONS

Godox V1 Mount

FB-GV1

FastBox Series

Attaching the Flash Adapter and Flash

Important! If your ﬂash has a diuser already installed

on the end of the ﬂash head, remove the diuser before

proceeding with the instructions.

Line up the alignment dots

on the FB-GV1 adapter

and the speedring. Insert

the adapter, and rotate

clockwise until it clicks in

place.

Removing the Flash and Flash Adapter

Carefully pull your flash

out from the adapter’s

magnets.

Align the head of your ﬂash

with the FB-GV1 flash

adapter’s magnets. Seat

the ﬂash into the adapter

so the ﬂash is secure.

Pull down on the flash

adapter release latch,

and rotate the adapter

counterclockwise to

remove.

PAGE 1
Godox V1 Mount FB-GV1 FastBox Series INSTRUCTIONS Attaching the Flash Adapter and Flash Important! If your flash has a diffuser already installed on the end of the flash head, remove the diffuser before proceeding with the instructions. Line up the alignment dots on the FB-GV1 adapter and the speedring. Insert the adapter, and rotate clockwise until it clicks in place. Align the head of your flash with the FB-GV1 flash adapter’s magnets. Seat the flash into the adapter so the flash is secure.
PAGE 2
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.