Collapsible LED Softbox LCSB-1206 LCSB-1212 INSTRUCTIONS
Assembling the Softbox 1 Attach the softbox before you mount your LED onto a light stand. 1. Unfold the softbox, and extend and lock the side support rods. 2. Rest the LED light on the back opening. Do not place the LED inside the softbox. 2 3. Close the side flaps around the LED. Then close the top and bottom flaps, and secure them with the touch-connect tabs. 4. Stretch the elastic straps across the back of the LED, and attach them to the touch-connect strips on the opposite side.
Recommended Accessory Angler LED (LCSB-GRID). Collapsible Softbox Grid To narrow the beam spread and control light spill, attach the accessory grid (available separately) to the recessed touch-connect strips on the front of the softbox. SPECIFICATIONS Material DimensionS (W × H × D) LED opening (W × H) Weight Diffuser: Polyester Side and rear panels: Polyester Inner panels: Silver-coated polyester 15.9 × 16.3 × 7.25 in. (40.4 × 41.5 × 18.4 cm) LCSB-1206: 10.5 × 5.2 in. (26.7 × 13.
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
