shadow focus floodlight SFS-300 INSTRUCTIONS
Introduction Congratulations on your purchase of the Angler SFS-300. The pro-style SFS-300 provides 300 watts of smooth light with focusing ability and is an ideal fixture for quick and easy set-ups on location or in the studio. It features a convenient cool-touch handle and a 12.5-ft. AC cable with an in-line, heavy-duty, rocker power switch. This light incorporates several advanced features such as a double-slot filter/scrim holder and a four-leaf barndoor.
Contents Four-way barndoor set Safety Glass Impact JCD Lamp 300W, 120V Also included: User manual One-year limited warranty 3
Operating Instructions Barndoor attachment C Loosen the barndoor locking screw (A) and open the hinged barndoor locking bracket (B). Seat the barndoor mounting collar in the three fixed barndoor brackets (C), then A close the locking bracket and retighten the locking screw. When properly installed, the barndoors are free to rotate 360°. B Mount on light stand The SFS-300 mounts on any standard, 5/8˝ diameter light stand.
Adjust light angle 2 Loosen the angle tilt knob (2), and position light angle as desired. Retighten tilt knob. Do not overtighten. Connect to power supply Plug power cord into a grounded 110/120V 3 AC power supply only. Switch on power _ Rock the power switch (3) to the “on” position ( ).
Note It is normal for the SFS-300 to smoke for a few minutes when first used, as the intense heat from the lamp initially burns off manufacturing residues. Smoking for longer than 15 minutes, however, is not normal, and may indicate a malfunction. If so, discontinue use and return to place of purchase. Quartz bulb filaments are fragile and easily broken, especially when hot. Always handle the SFS-300 carefully to avoid shock to the bulb filaments.
Changing the lamp 1. Disconnect unit from power supply. 2. Allow light to cool to room temperature before handling. 3. Remove safety glass by unscrewing the three retaining screws. 4. Remove expired lamp by pulling it straight out of the socket. 5. Insert new lamp in its plastic sleeve by pushing pins straight into the socket (a very tight fit is normal and necessary for proper operation). Then remove plastic sleeve. 6. Replace safety glass.
SPECIFICATIONS 8 Construction Synthetic housing, convection vented cooling Reflector 4˝ anodized aluminum Light beam spread 21-40° Socket 2-pin (GY9.5) Switch Inline power cord Power cord 120V AC Mount 5/8 inch WEIGHT 3.46 lbs. (1.5 kg) Dimensions including mount (H × W × Ø) 8.75ʺ × 8.75ʺ × 6ʺ (22 × 22 × 15 cm) Watts 300 Color Temperature 3100° K Average Life 100 hours Approx.
Warnings Quartz lamps generate extreme heat. To avoid injury, do not touch the light housing while lamp is lit. Allow light to cool to room temperature before storing or handling. To prevent bulb failure, do not bump or jar unit while lamp is hot. Do not operate unit without the safety glass installed. To avoid overheating, do not block vents or operate unit in a downward position for extended periods of time. This unit can cause severe burns if mishandled. Keep out of reach of children.
Power Requirements This light is designed for use with 110/120V AC power only, and is supplied with a three prong, grounded plug. Do not attempt to defeat this safety feature. If necessary, use only grounded extension cords rated for 6 amps Safety Glass The SFS-300 is supplied with a heat-resistant safety glass to prevent personal injury or property damage should the lamp shatter. Never operate the light without the safety glass in place.
One-Year Limited Warranty This Angler product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later.
anglerlights.
