Product Manual

安徽华米信息科技有限公司
Falcon_使用指南_简体中文版_低配版
选择正确的
方向图标拖
动到图纸里
纹理方向
69码商品名称SKU编码商品ID 产品型号
图纸提供单位
项目名称
版本号
设计时间
设计师
材质工艺要求
色相正确、印迹牢固、
套印准确、各色套印
不露杂色,套印误差≤ 0.1mm
模切走位≤±0.5mm
PANTONG Black C
方正兰亭准黑_GBK/6.5PT
方正兰亭细黑_GBK/5.5PT
印刷-连线哑油-切-折-切正-包装
105g太空梭哑粉,印刷过哑油,
风琴折
材质要求:
制作工序:
工艺要求:
颜色及专色:
字体及字号:
纹理要求:
比例 单位 mm1:1
小米生态链产品包装图纸
料号
A1921 A10803010100000
V1.0
2019.06.25
AMAZFIT GTR Product Manual
89mm
45mm
Charging base × 1 Instruction manual × 1Smartwatch with the band × 1
01 Package contents
1
02 About the Watch
2
Note:
1. Once the strap is assembled, pull the strap properly to ensure it is installed successfully.
2. The leather strap is not waterproof or water resistant. Please keep it away from any liquids.
If you are planning to wear your watch during swimming or any other activities that may
expose to water, please replace the leather strap with a silicon one.
1. The strap can be adjusted according to your wrist size.
2. Please refer to the illustrations to disassemble or assemble the watch strap.
06 Disassembly and Assembly of the Watch Strap
6
8
Note: This device has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interferences in a residential installation. This device generates,
uses, and may radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However, there is
no guarantee that interference will not occur in a particular installation. If this product does
cause harmful interference to radio or television reception, which can be determined by turning
the device off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
Only use the original charger to charge your
watch. The charging plates on the back of
the watch should be aligned with those
of the charger. Once the watch begins to
charge, the charging indicator will appear
on the screen.
Note:
Only use the original charging base provided
in the product package to charge your watch.
Also make sure that the charging base is
always kept dry.
05 Charging the Watch
5
Note: If the watch is powered off and doesn’t turn on when you press and hold the power buon,
the baery may be running low. Please charge the watch and try again.
03 Installing the App
3
The watch works with the Amazfit App. The Amazfit App helps you control your smartwatch
and all its functions.
1. Press and hold the power buon to turn the watch on.
2. Scan the QR code on the Instruction Manual with your mobile
phone to download the Amazfit App to your mobile phone. You
can also download the latest version of the Amazfit App from
the Google Play Store or Apple App store.
Note:
1. For a beer user experience, please use the most recent version
of the Amazfit App.
2. The operating system needs to be Android 5.0, iOS10.0, or above.
1. Open the Amazfit App on your mobile
phone and create an account. Please
login if you already have an account.
2. From the device list, select the watch
you want to pair. Finish pairing by following
the instructions on the app.
3. Once the pairing is done, the watch will
display the correct time. You can set the
other watch functions as needed.
Note: Do not pair the watch directly using your mobile phone’s Bluetooth. Follow the steps in
the app to pair your watch correctly.
04 Pairing the Watch
4
- Reorient or relocate the receiving antenna.
- Increase the separation between the device and receiver.
- Connect the device into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
9
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including the interference that may cause
undesired operation.
FCC ID:2AC8UA1910
Any changes or modifications that are not expressly approved by the party responsible for the
compliance may void the user’s authority to operate the device.
07 Regulatory Notice
7
Under Industry Canada regulations, this radio transmier may only operate using an antenna
of a type and the maximum (or lesser) gain approved for the transmier by Industry Canada. To
reduce the potential of radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotopically radiated power (e.i.r.p.) is not more than that
necessary for successful communication.
Conformément à la réglementation d'Industrie Canada, le présent émeeur radio peut fonctionner
avec une antenne d'un type et d'un gain maximal (ou inférieur) approuvé pour l'émeeur par
Industrie Canada. Dans le but de réduire les risques de brouillage radioélectrique à l'intention
des autres utilisateurs, il faut choisir le type d'antenne et son gain de sorte que la puissance
isotrope rayonnée équivalente (p.i.r.e.) ne dépasse pas l'intensité nécessaire à l'établissement
d'une communication satisfaisante.
1110
This device complies with Industry Canada license-exempt RSS standard(s). Operation is
subject to the following two conditions:
(1) This device may not cause interference, and
(2) This device must accept any interference, including interference that may cause undesired
operation if the device.
IC:21806-A1910
CAN ICES-3(B
)/NMB-3(B)
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils
radioexempts de licence. L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le
brouillage est susceptible d'en compromere le fonctionnement.
1. The device is water resistant with a certified rating of 5ATM. This means that the device is
resistant to rain and can be worn while showering. It may also be used in shallow-water
activities, such as swimming in a pool.
2. However, the watch should not be used when scuba diving, bathing, taking a sauna, or in
other activities involving a high-velocity of water or the submersion below shallow depth.
4. Please do not operate the watch underwater. Aer submerging, dry it with a dry cloth before
operating or charging.
3. The watch is not protected against chemical reagents, acidic or alkaline solutions, etc.
Defects caused by liquid damages are not covered under the warranty.
12
The following symbol signifies that this device has to be disposed separately from
ordinary household wastes at the end of its life. Please kindly be aware that this is
your responsibility to dispose the electronic device at recycling centers so as to
help conserve the natural resources.
08 Disposal and Recycling Information
Hereby, Anhui Huami Information Technology Co., Ltd. declares that the radio device type
A1924 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of
conformity is available at the following internet address:
hp://en.amazfit.com/support.html
For more regulatory information and product certification/compliance logos related
to AMAZFIT GTR, please go to Regulatory on your AMAZFIT GTR.
09 Certifications and Safety Approvals
13
10 Safety Notice
The Amazfit Limited Warranty covers Amazfit products against manufacturing defects beginning
on the original purchase date. The warranty period is 12 months or other period as the applicable
consumer laws in the consumer’s country of purchase require. Our warranty is in addition to
rights provided by applicable consumer laws.
Official website: en.amazfit.com
Support: support.amazfit.com
Email: support@amazfit.com
14
11 Basic Parameters
15
12 Warranty and Return Policy
1. Press once to light up the screen
2. Press and hold the buon to turn the watch off or
to restart it
Power buon:
Heart rate sensor
Charging plates
Return buon
Name: AMAZFIT GTR
Product model: A1924
Baery capacity: 195 mAh
Wireless connection: BT 5.0, BLE
Input: 5V 500 mA MAX
Frequency: 2402 MHz - 2480 MHz
Max. Output: 0 dBm
Operating temperature: 0°C to 40°C
Water resistance rating: 5 ATM
Device requirements: Devices installed with Android 5.0 or iOS 10.0 or above OS versions

Summary of content (1 pages)